Proteus Power Control

Proteus Power Control
This is a very handy project that I created to easily control multiple things from my desk. Anything plugged into this will be turned on and off by the button. The one in the photos is for specialized speakers and hardware that needs to be turned on/off multiple times while working/testing - instead of unplugging each one individually!

Safety Disclaimer:
Please test and check your wiring before leaving it plugged in. This is meant to be left running 24/7, ensure that it works properly before leaving it. You are responsible for all parts and wiring.

Printing
Use any filament
No supports needed
Models should lay flat by default. If not you need to print models with the back on your build plate (plug side).

Electronics/Wiring
Please ensure you follow the wiring diagram and use proper wire gauge.

Power wires must be Single Strand (solid) Wire - 12 gauge.
Button wires can be Stranded Wire - 20 gauge or larger.

Suggested parts:
this is designed for these part sizes

1X US/Canada Standard Wall Outlet
This is the exact model it is designed for.
https://www.homedepot.ca/product/leviton-duplex-tamper-resistant-receptacle-white/1000659839

1X 19mm LED 110-220V Self Locking Button
https://www.aliexpress.com/item/4001291695467.html?spm=a2g0o.productlist.0.0.6bb82da3SiB7ZD&algo_pvid=4f807a96-f1af-4923-a7b7-6753fdc7c352&algo_expid=4f807a96-f1af-4923-a7b7-6753fdc7c352-3&btsid=0bb0624716207940485652955ef312&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

14X M3x4x4 Brass Inserts (use soldering iron to melt into printed holes)
https://www.aliexpress.com/item/4000232858343.html?spm=a2g0o.productlist.0.0.6b108ad6RdGirY&algo_pvid=null&algo_expid=null&btsid=0b0a556116207930102041044ea72d&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

14X M3X6 Bolt
https://www.aliexpress.com/item/10000150053486.html?spm=a2g0o.productlist.0.0.54af6ce2uY7eU2&algo_pvid=558ba376-2f41-4ac7-8814-4b93b5f0b7b8&algo_expid=558ba376-2f41-4ac7-8814-4b93b5f0b7b8-1&btsid=0b0a555f16207933229985340ec332&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

1X SSR-40 VA Solid State Relay
https://www.aliexpress.com/item/32846658289.html?spm=a2g0o.productlist.0.0.59c98a3bTcE9q3&algo_pvid=e63033eb-b9ce-44a9-aaca-37554cf92a2e&algo_expid=e63033eb-b9ce-44a9-aaca-37554cf92a2e-18&btsid=0b0a556416207930853913947eba1c&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

1X AC Power Plug AC-07
https://www.aliexpress.com/item/33062019990.html?spm=a2g0o.productlist.0.0.3e7d7d0eCEJHI3&algo_pvid=null&algo_expid=null&btsid=0b0a556616207932323306953e6626&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

1X AC Power Cord - US
https://www.aliexpress.com/item/32947880662.html?spm=a2g0o.productlist.0.0.53b9693dtt7Tqr&algo_pvid=null&algo_expid=null&btsid=0bb0623c16207937223567533e991c&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

Assembly
1 - Heat up solder iron, clean solder tip and remove any solder, push brass inserts into plastic with soldering iron. The holes on the "Base Plate" are for the brass inserts.

2 - Bolt on AC-07 Power Outlet onto base plate

3 - Bolt on SSR-40 Relay

4 - Connect/Solder solid wire from relay (1) to AC-07 (right)

5 - Connect/Solder solid wire from relay (2) to Power Outlet (hot)

6 - Connect/Solder solid wire from AC-07 (left) to Power Outlet (white)

7 - Connect/Solder AC-07 (bottom/ground) to Power Outlet (ground/green)

8 - Connect/Solder relay (3 & 4) to Button NO & C

9 - Connect/Solder AC-07 (left & right) to Button (+ & -)

10 - Bolt Power Outlet into base plate

11 - Plug AC-07 into wall to test power. LED on button should light up all the time. Power meter set to AC 200V+ on Power Outlet should test 1V average when button is off, and 90-110V when button is pressed.

12 - Put cover on and enjoy!

Questions
Please let me know if there are any issues or concerns or ideas.

Any ideas for add-ons please let me know! Other clip types, front tray types, etc.