Splint - Full finger, and short for second knuckle

edit: short_splint_v1.2.stl rounded arches corners as they were digging in the skin
and softened the front

---

edit: short_splint_v1.1.stl is one I tweaked a bit after printing the original short one I made. tiny bit longer and wider, and shortened the front arches.

---

Hurt my finger so I made this.

Hope that helps someone.
Print in PLA
Scale to your need, and use hot water to mold the arches to your finger

No support, worked great at 0.20 and 0.16mm layer height
8mm brim helped me against edge curling

The f3d fusion files are not "clean" and quite messy, but if they can be useful to modify them they are there. Also added STEP format files