May 15, 2021
Description
No glue, no nuts, no screws, easy to print, nice to use tickling fingers!
To achieve the result you need to print:
side1, side2, side3, side4 - print one
gear, worm - print one
It's recommended to use filament of different colors for gears and sides.
PETG, ABS, PLA - good choice for the thing filament
(PLA is not so good for worm gear because it is rough)
Creality, TEVO, Prusa, Anycubic, Anet, Flying Bear, Wanhao, Reprap, Ultimaker - 100% printable with good result.
I use Ender 3 (with standard hotend 0.4) and about 1 hour to print this fidget.
You can use a thinner nozzle and layer height to archive maximum accuracy
May be you need sandpaper or nailfile to smooth edges.
You can fix the detail forever with glue if you wish.
You can also use another antistress toys I made:
https://www.thingiverse.com/thing:4855514
https://www.thingiverse.com/thing:4854632
https://www.thingiverse.com/thing:4857857
https://www.thingiverse.com/thing:4858354
License:
Creative Commons - Attribution - Non-Commercial
SunDoc
