May 16, 2021
Description
My make of the Knife Sharpener
This is a collection of all remixes that fit my needs, in order to make the Knife Sharpener.
The only part I design myself is the end cap for the 10mm pipe.
Most of the parts are not from this design, but remixed ones, anyway they can be found in this remix.
| Part | Thing | Description |
|---|---|---|
Body.stl | thing:1274297 | From the original design |
guideBody1.stl | thing:1274297 | |
GuideBody2.stl | thing:1274297 | |
Sphere.stl | thing:1274297 | |
Guide.stl | thing:1274297 | |
Knob.stl | thing:1274297 | |
Guide_0deg.stl | thing:1274297 | |
Guide_10deg.stl | thing:1274297 | |
Guide_12p5deg.stl | thing:1274297 | |
Guide_15deg.stl | thing:1274297 | |
Guide_20deg.stl | thing:1274297 | |
Guide_25deg.stl | thing:1274297 | |
Guide_30deg.stl | thing:1274297 | |
KnifeSharpenerFoot-v1.1.stl | thing:4605375 | Remixed version, for better stability |
Springloaded_Handle_4_Stones_Part_1.stl | thing:3655088 | Like the idea to have all the stones plugged |
Springloaded_Handle_4_Stones_Part_2.stl | thing:3655088 | |
Springloaded_Handle_4_Stones_Part_3.stl | thing:3655088 | |
guid_stopper.stl | thing:4285716 | |
Guide_Holder.stl | thing:4419802 | Case for the angles |
HolderKnob.stl | thing:4591835 | The knob use 5mm screw, used HSS drill for the stone handle |
10mm-pipe-end-cap v1.stl |
Found helpful to link the tips provided in the description of thing:4591835
- Get a set of stones for example 1000,3000 and 6000 grit. Start from lowest grit.
- Soak stones before sharpening.
- Sharpen one side of blade until you can feel a burr, then change side, then move to higher grit.
- Only apply pressure on the push stroke. don't apply pressure on the pull.
- Cover about an inch every stroke, work your way along the blade.
- Keep the blade edge parallel to the sharpener edge.
Enjoyed my work? Feel free to show your support by buying me a coffee. Your contribution helps fuel future projects and keeps the creativity flowing. Cheers!
License:
Creative Commons - Attribution
ayanev
