May 19, 2021
Description
Hi,
here is another fantastic Graffitti from my collaboration with the Graffitti artist Causeturk. There are two versions of this awesome piece. The "one piece" and the "single letters". Everything is scaled so it fits on a Prusa Mini. Anyhow this time I wanted to go bigger, so I made every letter a single file and scaled it up.
This print is not using multiextruders or multimaterial kits, it's only a colorchange in z-direction.
Feel free to leave some feedback in the comments and let us see your prints.
Take a look at the .3mf sclic3r files, you can see all colorchanges and print settings there. I printed the pieces on a Prusa Mini.
This is printed with 0.2 mm layers and one z color change. The color change itself and all relevant printing parameters can be seen and adjusted in the Slic3r .3mf files. The filaments I used are linked below.
Design:
Causeturk supplied me with the sketch of this piece. I converted it to a .svg file with inkscape which was then loaded to Fusion360. Here some slight modifaction of the design had to be made, to make it FDM printable.
Links
Causeturk on Insta
https://www.instagram.com/causeturk/
Filament 1 (one piece, gras green):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/60/pla-filament-1-75-mm-grasgruen?c=11
Filament 2 (both designs, magenta):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/223/pla-filament-1-75-mm-magenta?c=11
Filament 3 (black):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/363/pla-filament-1-75-mm-schwarz-matt?c=11
inkscape (open source vector image editor)
https://inkscape.org/de/
How to colorchange:
https://www.help.prusa3d.com/en/article/color-change_1687
License:
Creative Commons - Attribution - Non-Commercial
Maeshmaker
