"Grave" Graffitti by Causeturk

Hi,
this is the wildstyle Graffiti "Grave" drawn by the by the fantastic artist Causeturk. Go check out his Instagram and show some love if you like the design (link below). The brickwall background is printed as well (two times).

This print is not using multiextruders or multimaterial kits, it's only colorchanges in z-direction.

Feel free to leave some feedback in the comments and let us see your prints.

---

Print

Print the brickwall two times in grey and orange with a colorchange. Put the two walls togehter, they hold by friction, it should be a bit tight on purpose. Print the Graffitti also with a colorchange. Position the graffitti on the brickwall with a drip of glue (or what I do use double side 3M tape this will hold the pieces together and still be removable). Also use double sided tape to put the whole piecce on a wall. All print settings and colorchanges are already added in the .3mf slc3r files.

---

Design:

Causeturk supplied me with the sketch of this piece (you can also find it on Instagram). I converted it to a .svg file with inkscape which then was loaded to Fusion360. Here some slight modifaction of the design had to be made, to make it FDM printable.

---

Links

Causeturk on Insta
https://www.instagram.com/causeturk/

Filament 1 (royal blue):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/84/pla-filament-1-75-mm-koenigsblau?c=11

Filament 2 (sunny yellow):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/7/pla-filament-1-75-mm-sonnengelb?c=11

How to colorchange:
https://www.help.prusa3d.com/en/article/color-change_1687it.