Focusrite Scarlett mount ( Solo / 2i2 / 4i4)

After a humbling positive feedback on Reddit (https://www.reddit.com/r/functionalprint/comments/nlfcpa/its_so_satisfying_to_design_a_solution_to_a_super/), I designed a new Focusrite Scarlett mount.

I originally created a mount to fit my Scarlett Solo 3rd Gen under my desk, but it was too customized for my specific case, so I created one to fit all desks!

This new design has the screws at the top and they're hidden from sight for a cleaner look.

This print need supports as not all overhangs can be bridged. But if you're feeling lucky you can remove the supports for the parts that don't receive the screws, I wouldn't recommend it tho.
After some comments about how hard it is to remove the supports, the best way is to print the supports with no outer walls (Support Wall Line Count set to 0 in Cura). The exposed support structure is easier to remove.

It must be relatively sturdy to be screwed and to handle the stress of plugging/unplugging audio cables over and over, so I went with 3 perimeters top/bottom/walls.

As requested I created the following versions:
. Solo 3rd Gen
. 2i2 1st Gen
. 2i2 2nd Gen
. 2i2 3rd Gen
. 4i4 3rd Gen
. iTrack Solo

Please feedback if you find any issues, different models/versions have different dimensions.
..if you need one for another Focusrite model, measure the following and write them in the comments:

Red metallic enclosure: W x H x L (the border radius is good to know but not essential)
Rubber feet: W x H + distance center to center (from the front view)

Thank you all for the positive feedback and I hope this can help you out!

If you'd like to support this work and future projects, I'd really appreciate it! :)
Paypal: https://paypal.me/danielziller