Home-Made Protection "DIY_Rear lens-Cap", Nikon F/ Fujifilm X(fx)/Canon FD mount

This rear Lens-cap is designed for lens types with a protruding rear of the lens. Although this type of lens is less common, you can find it in wide-angle lenses for older RF cameras or interchangeable lenses for cinema cameras. We also added a mount lens cap for digital mirrorless cameras so that you can mount these lenses on digital mirrorless cameras using an extension adapter.

In addition to what was introduced in the previous video, Canon FD and Nikon F mounts and Fujifilm's X mount were added.

For EF, PL, MFT, E, M mount rear caps, please refer to the link below
https://youtu.be/wjHL6QEp2jM

In most cases, there is not much difference in the function of the lens rear cap, so this lens rear cap also makes no difference except for appearance.

Some lenses may be a bit loose or tight, as different lens or adapter manufacturers have subtle differences in mount specifications. In the 3D printer's output settings, it is recommended to use a 0.4mm nozzle and print about 0.2mm in height.

File sharing is for sharing ideas. Use it for personal use only. Commercial use is not permitted.

Refer to the link below for more information and print file(STL).
https://surplusperson.tistory.com/819

If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses.
https://paypal.me/suplusperson