June 6, 2021
Description
This is a fanbox for the Anycubic Mega-S printer. I had my troubles printing some of the boxes I found here. So I made up my own.
You can print it all flat, and glue the parts together. The honeycomb-fancovers will lay flat on the hotbed. So no stress with supports (that might not work out). You can print the anycubic "A" in a different color.
The fanbox is very strong, all sides are 2.5 mm. I used a Noctua 40x10 12V fan on one side, and the standard radial-fan on the other side.
You might need 4 screws, that are just a bit longer than the original, to install the box. And you will need 4 M3 nuts.
The fan duct you see in the picture is this (Anycubic i3 Mega S - Fan Duct by matism09):
https://www.thingiverse.com/thing:3564168
License:
Creative Commons - Attribution
hazweio
