Karl Gerat Mortar easy print

Come support these models over on Patreon
Buy my time, Not my models.

Easy to print Karl Gerat Mortar, not so easy to assemble, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability.

The "EP" files are the standard filament files like the rest of the easy print series.

The "small plate" files are for smaller printer plates or larger scales.

The "whole resin" files are for those of you that are printing with resin printers and would prefer the assembled model. This is a big model, about the same footprint as a Maus.

This is a COMPLEX assembly especially at 1/100, I have tried to put up images to help, but you can also take apart the resin whole versions in your editing software to see how it goes together.

if assembled correctly the pin must be removed to angle the gun. the pin holds the teeth against the teeth in the hull. The standard easy print files have one crossbeam that must be cut out to allow the mortar into place. It is there to fight warping during printing and assembling. this beam has been rmoved from the resin version.

Scale by 1.56 for gaslands / hotwheels / 1/64

Scale by 1.786 for 28mm / 1/56