Summary

This is a cable holder and cover for the Anycubic Mega-S printer.

You can print it all flat, and glue the parts together. The honeycomb-layout will lay flat on the hotbed. So no stress with supports (that might not work out). You can print the case in different colors.

The case is very strong, all sides are 2.5 mm.

You need 2 screws, that are longer than the original, to install the case on the Printhead.

The Printhead Case Cover you see in the pictures is this:
https://www.thingiverse.com/thing:4879416

The fan duct you see in the picture is this (Anycubic i3 Mega S - Fan Duct by matism09):
https://www.thingiverse.com/thing:3564168

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40</p></div></p>                                                    <strong>Filament:</strong> Anycubic PLA Filament                black & yellow

Anycubic i3 Mega Mega-S Upgrade Printhead Cable Cover and Holder Case Honeycomb Hotend Fanbox

Anycubic i3 Mega Mega-S Upgrade Printhead Cable Cover and Holder Case Honeycomb Hotend Fanbox

Related Models