Hose / Pipe / Cable Clamp Set

A set of screw fasteners for hoses, pipes or cables. I have created the sizes 10,20,30,40 and 50 mm, but it should be no problem to scale accordingly for intermediate values.

I recommend to scale always larger than smaller, so that the screw holes are not too small, so you need for example a fastener for a 26 mm hose you just take the 20mm fastener and scale it to 130%.

And here's a tip: turn the clamp to the side for printing, so you have a cleaner, easier and more stable print. (I have included a photo of my print on the printing plate for example).

x = 10mm /20mm /30mm /40mm /50mm

As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.