Tronxy XY3 Hotend Housing and Duct for V5 Heatblock

Hotend housing incorporating BL Touch mount.

Note: The air duct is sized to fit a V5 16x16mm (20x20 with sock) heat block with a silicone sock. The MK8 heat block size is 20x20 (24x24 with sock).

Housing printed with supports touching build plate. The slant is at 45 degrees, set slicer overhang to 60 deg to minimise printed supports

BL-Touch related dimensions.
Offset dimensions: X = minus 55.5, Y = minus 11.5.
Bottom of probe body is 6mm above tip of nozzle, actual dimensions will vary depending on nozzle assembly. Z offset is in region of minus 1-3 mm. Follow Z adjustment instructions for BL-Touch setup to avoid bed crashes.

3 duct options to fit 2 pcs x 5mm dia LED.

1. With holder for 2 LEDs on outside of duct
2. With hiolders for 2 LEDs inside the duct
3. Without LED holders
   Print duct with NO supports.

Included drawing with dimension showing location of mounting holes.

The housing for X5SA is included. The mounting pads are without holes as I don't have the dimensions for it and the BL Touch mount is removed. Drill holes as required to fit.

Edit 29 Jun: Revised air duct LED position to inside of duct, next to outlets.