TENLOG TL-3 Pro Filament runout sensor mount

My Tenlog TL-D3 pro came with different runout sensors that didn't fit this original design, so i made my own in fusion 360.
My first fusion design trying to learn that software, came out pretty good i think.
The clip is from the original files thanks to Nip1992
Just put both modules on the build plate, splice and print out in mirror mode. Wala you have one for each side.
Installation should be easy enough. put the main part on first then add the clip. It takes a bit to pop the clip into place around the cable, but works pretty well holding the sensor mount in place.