CR10S Pro V2 Hot End Light

I designed this as a one piece LED strip holder for the hot end of my CR10S ProV2. It clips onto the metal fan/hot end shroud. The 10mm LED strip I have can be cut into 50mm sections, making it ideal for wiring into the main fan supply (24v). The vent holes in the LED holder may help keep the LED strip a little cooler than without and help to avoid obstructing the shroud vents. The LED fits into the slot but if self adhesive, use this as well to prevent it sliding out. Print in PETG or similar heat resistant material. Use brim to keep on bed while printing and clean off after. Designed for 10mm piece of 24v LED strip (which will cut to 50mm lengths (480 leds/m) Available via www.amzn.to/3qwIplg Short lengths of 24 - 30 AWG wire (2x100mm will do) solder wires to led strip and wire into to hot end fan supply with T or I splicer(s) or...