3d printable Tic-Tac (for Tic-Tac gun)

3d printable Tic-Tacs, so that you don't have to throw away the real ones when you inevitably shoot them on the floor.
Layer height 0.2, 2 perimeters, no infill. You shold probably use a brim, or have very good bed adhesion, as the little tic tacs could be knocked down mid print.
Print at slow speed, i used 20mm/s and 5mm/s for the initial layer.
Also please don't leave them around children, they're probably a big chocking hazard.