June 29, 2021
Description
ADXL 345 Accelerometer Nozzle Mount for E3D V6 HotEnds.
Optimized for Voron Afterburner hotend.
F3D/STEP Attached.
https://www.youtube.com/watch?v=19LHY6QOS8w
if you will be lucky, you can use same mount for Y axis on slinger printers (3mm bed+4mm glass, 3mm bed + magnetic pad + 3mm glass)...see gallery
Created optional Lid/Case for dupont connectors.
It helps also to hold connectors in place.
Download "for Lid" versions - one more hole for lid mount
I will add JST version in the future as well.
Added .f3d (to simplify modification for other pcb sizes although it's little messy, will clean it later maybe)
Added more universal version which fits to both E3D V6 and Dragon hotends.
If you own only E3D V6 hotends use the previous one, it's bit stiffer.
Note:
After doing several comparison tests of rigid mount (adxl attached by two screws to AB body/carriage) vs. nozzle mount (this one) there is no significant difference esp. in suggested resulting input shaper algo and freq. So choose whatever method you like without worry about loosing precision.
In any case if you notice any problems, I would really appreciate a feedback, there is still a probability that my testing conditions were in some way specific and not representative.
License:
Creative Commons - Attribution
tzeman
