Description

Any pen holder for the snapmaker 2.0 Works for pens from Ø3mm up to Ø12,5mm (Ø1/8in - Ø1/2in). Animation: https://youtu.be/oRkqm3IamCg

Instruction

Create your own collet [004] based on the *.step, *.stl or *.scad file with the diameter of your pin or tool. The nut should only be hand-tightened. I recommend to print the the spanner tool but only for loosening. If you have problems with the fit of the nut, print the dummy collet for reference and scale your nut in X & Y. Setting "Outer Before Inner Walls" in Luban or Cura also helps with tolerance problems. Bill of material:

1. 1x 030.007.001 (Print individually with raft.)
2. 1x 030.006.002
3. 1x 030.007.003
4. 1x 030.007.004
(customize diameter)
5. 1x 030.007.005
6. 4x THK LMU5 "linear bushing" (*)
7. 2x MISUMI SFJ5-75 "linear shaft" (*)
8. 1x rubber band
9. 4x DIN 7984 M4x10

*You can find a up to date list with suppliers here in the description: [snapmaker 2.0 snap turtle cutter](https://www.thingiverse.com/thing:4824628)

Update

06.07.2021 - "additional spanner tool / dummy part for thread verification"

• 030.007.004_01_dummy
• 030.007.006_01

*You can find a list with suppliers here: [snapmaker 2.0 snap turtle cutter](https://www.thingiverse.com/thing:4824628)