Boba Fett Vambraces, Rearmored / Fresh version (Mandalorian) / ROTJ

Edit 2/23/2025
V5 of right vambrace updated - included missing lower hose attachment. Also added "vambrace_rt_lower_hose_add.stl" if you printed v4 and need to add the part.

Edit 3/25/2024
V4 of right vambrace top and bottom added

Edit 3/15/2024
Unified left vambrace top v2 added - blaster mounts and slot tabs included this time

Edit 7/28/2023
Unified left vambrace top added

Edit 6/3/2022
I had previously stated you should scale the left vambrace down. Now I'm not so sure, as I've spoken to several people that kept it 100% and it fit fine. I'll leave it to the maker's discretion!

Update 8/22/2021
Left vambrace uploaded! This one took quite a bit more work than the right as I had to design in sections in order for the parts to fit on my Ender 3. I've designed spots for LEDs - one behind the dental expander for the holo projector, and two behind each gun barrel. The LED holes will need some cleanup with a blade or drill bit before they'll fit the LEDs. You'll have to install the gun LEDs before gluing the two pieces together so make sure you solder any wires and resistors you need. Print 5 of the plug pieces for assembly. Assemble the upper portion and gun separately, then use the locking pins to slide the gun into place. The gun is meant to be friction fit so you can access the battery pack.

I recommend printing the casio keypad and dental expander on a resin printer.

The rocket is provided as a solid piece or two-piece assembly. I found the two-piece is a little easier to print. The rocket is designed to be kept on with 1/4" magnets.

The gun barrels are threaded and should fit perfectly. They work great on my test print at .28 height.

Update 8/15/2021
V3 now uploaded. The holes for the darts and laser are enlarged and straightened out. Fixed a couple of surfaces not being completely flat. Updated some missing details. Hollowed out some of the inside to accommodate actual switches. Changed the angle of the back piece hose connector. I've only uploaded V3 as the full vambrace, the split pieces are still the older v2.

---

Boba Fett vambraces, based on images from The Mandalorian. This is meant to be for the rearmored Fett but reference from post-sarlaac, Boba Fresh, and ROTJ versions was used. I've worked very hard to make sure these are as accurate as possible within my timeframe and I'd say they're around 80-90% accurate. They may need some scaling depending on your arm size, I'd recommend measuring before printing.

I printed the smaller detail pieces on a resin printer but they could probably be made to print on an FDM machine. All files are sized to fit on an Ender 3.

I'm providing these here on Thingiverse as a way of paying it forward - I downloaded an amazing Fett helmet here for my costume, as well as countless other costume pieces and models that others have graciously provided for free.

Hardware I used:
D42-N52 Magnets x4
6mm mini SPST switches x2
6mm button toggle switches x2

Files and prints are not for distribution or sale.