CyberBase Tracks Connector for Transformers WFC Ark Ramp

Continuing with the Ark, here's another quick addon for it to add more play (and display) value by allowing its ramp to be able to connect to other WFC or TR compatible connectors!

The main piece hooks onto the end of the Ark's lowered ramp and has a slot for either the (also included) WFC or TR connectors to be slotted in place.

The main piece itself has slot on the inside, which is designed to "hook" onto the protruding tab on the end of the ramp.

So to get this in place, it needs to be first positioned at a steep angle (almost perpendicular) to the ramp first, while lifting it slightly, then rotate it back to be parallel to the ground, and it should catch rather nicely.

From here, connect up whatever you would like to this now enhanced end ramp! Anything from other CyberTrack ( https://funbiestudios.com/model-catalog#cyberbase-tracks ) pieces, hook up the earlier deployable Autopods, or just about any other figure you may have which come with the WFC or TR connector points!

For keeping this away when the ramp is raised or for bot mode, the part can simply be tossed into the compartment where the "bridge" is stowed as there is more than enough space in there.
It is recommended to print this vertically to give the details the best chance of showing up nicely.

Hope everyone enjoys 3d printing and playing with this little useful addon for the Ark! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog