Husky jeweler's screwdriver wall mounted holder

Wanted a space to grab my Husky brand jeweler's screwdrivers while working on the workbench. The area in front seemed logical for my purpose, however these are wall mountable anywhere you can drive in some screws or use command strips/double sided tape. Two versions, one 7 slot for all the drivers in this set, and one with 3 slots per to fit in the width of a standard 2x4 (3 1/2" or 88.9mm).

The drivers press into the print and hold secure as they are rubberized. Nothing special about print, print them flat and 2-3 perimeters, 20% infil or less. I used Fusion Filaments HTPLA+ (870) Ionized Cobalt Black. Open to suggestions, or mods as needed to fit your space.

Be sure to like as well, it really helps others to find this thing! Thanks.