Flying Bear Ghost 5 Thermal Camera

This is a thermal camera for a Flying Bear Ghost 5 3D printer.

This project includes:

• DWG files for acrylic/plexiglass cut
• Printed parts you will need to assemble the camera
• STEP files for your modifications.

This project is designed to use 5 mm plexiglass. If you plan to use different thickness, you should modify printed parts.

You will need:

1. Pre-cutted plexiglass panels (front, back, left, right, top, bottom door, top door). You'll find DWG files in the archive. There are two versions of a back panel: one should be used with the printed cable pads and the other is without cable pad holes.
2. Printed parts:

• top-panel-bracket x4
• hinge-bottom-door x2
• hinge-top-door x2
• (optional) cable-pad x2 - should be printed with TPU/Flex
• door-magnetic-lock-1 x3
• door-magnetic-lock-2 x3 - designed to use with 15x8x2 magnets
• (optional) door-lock-1 x3
• (optional) door-lock-2 x3
• (optional) door-lock-3 x3 - if you don't want to use magnets
• screen-cover-1 x1
• screen-cover-2 x1
• screen-cover-hinge-1 x2
• screen-cover-hinge-2 x2
• screen-cover-hinge-3 x2

1. M3x12 screws x21, M3x8 screws x8 and M3 nuts x29
2. M4x12 screws x53, M4x16 screws x16 and M4 nuts x69
3. Glue gun, screwdriver

Bottom door and top door hinges were taken from this project. Many thanks to the author!

Have fun!
Please press a LIKE button if you find this project useful!