Zhiyun Crane 2 USB cable support

Designed to stabilize and protect the USB cable and connector that connects the Crane 2 to the camera.

The Micro USB connection for the camera had become very loose and we were having problems with the camera losing connection to the remote buttons on the Crane.

I opened the motor housing to the right of the camera and inspected the PCB assuming the USB connecter had broken solder joints but it was fine. The metal housing, however, had stretched out of shape so I squeezed it closed again and the camera worked fine again.

To prevent the problem from happening again, I designed this brace to hold the USB cable in place and protect it from damage again.

Printed on its side with minimal support. I used M3 socket head cap screws and brass threaded inserts, but you could use regular nuts too...

I printed it with PETG and it stretched around the motor no problem.