NR Bear Einsy Cover with Outside Wire Exit

I really like the NR Bear remix of the Zaribo Einsy case from nickrno77. However, because my printer sits in an enclosure with a detached power supply, I needed a way to route the power cables into the Einsy from the left side of the frame (outside edge of the Einsy case).

Unfortunately, the source files for this design are Blender, not CAD, so I ended up having to reverse engineer the mesh file in Fusion 360. Once that was done, I truncated the bottom section of the cover to allow wires to exit. I've printed and tested this, and it fits nicrno77's case perfectly. I also changed up the holes for the screw heads to use socket head screws rather than flat head screws.

Print settings are not all that critical, but I printed in PETG at 0.2mm layer height, 3 perimeters and 20% infill. No supports needed.