Sodastream Bottle Wall Mount

I made these models so that I could attach the Sodastream bottle to the wall.

There is four models:

• Bottom: Sodastream_Holder_1

• Top single version: Sodastream_Holder_3

• Top Hinge version: Sodastream_Holder_2_Part_1 and Sodastream_Holder_2_Part_2

The hinge version needs the following:

• 1 pcs 6 mm partially threaded bolt (at least 34 mm without threads) as a pin for the hing. Cut it at 34 mm from the head.
  I used the lathe to make the head round, but that is not necessary.

• 1 pcs 16 mm partially threaded bolt (at least 34 mm without threads) for the lock mechanism. Cut out a 34 mm piece of the non threaded part. Drill a hole in the center with 6 mm threads.

• 1 pcs 6 mm threaded bolt as locking bolt

• 4 pcs Screws to attach the mounts to the wall. I used 3 mm screws.

Have a look at the pictures to see how I did this.