July 30, 2021
Description
Crashed TIE fighter! I made this as a request for a fish tank decoration. If you print it for this purpose, make sure it's fishy safe!
Supports are required for this model. I set mine to 65% overhang.
I used a .4 nozzle at .2 layer height, 60mm/s speed.
I used zero infill with 5 walls, but you can print however you like!
If you like what you see, please consider tipping! It will make my wife happy and I'll be able to keep designing without getting yelled at every day!
License:
Creative Commons - Attribution - Non-Commercial
KodOfWar
