August 1, 2021
Description
Case for the FPV Laptime Tracker PCB from SmartHomeYourself.de for the RotorHazard System.
This system is to track laptimes of FPV Racing Drones in races.
No modification of the FPV Copter is needed, because tracking based on 5.8GHz VTX signal strength.
The PCB is designed to be connected via I2C to a Raspberry Pi which runs the RotorHazard System.
You can find the PCB for this project on pcbway.com:
https://www.pcbway.com/project/shareproject/FPV_Laptime_Tracker.html
More Information about the Project: https://smarthomeyourself.de/fpv-lap-timer (german)
Used components:
Raspberry Pi 3: https://www.amazon.de/dp/B07BFH96M3?tag=danieschei-21 *
3x Arduino Nano: https://www.amazon.de/dp/B0755XYBG4?tag=danieschei-21 *
3x 5.8GHz Receiver (RX5808): https://www.amazon.de/dp/B0928CP6W4?tag=danieschei-21 *
3x Heatsink: https://www.amazon.de/dp/B077VM8FJW?tag=danieschei-21 *
2x Fan40x40x10: https://www.amazon.de/dp/B07RL15JGM?tag=danieschei-21 *
USB-socket: https://www.amazon.de/dp/B08RSGYV1S?tag=danieschei-21 *
Thermal glue: https://www.amazon.de/dp/B01F1F1NPO?tag=danieschei-21 *
9x 1k Resistor: https://www.amazon.de/dp/B00I8NOILI?tag=danieschei-21 *
3x 100k Resistor: https://www.amazon.de/dp/B00IYVMU3C?tag=danieschei-21 *
Headerpins: https://www.amazon.de/dp/B078SQ1CZF?tag=danieschei-21 *
Din-socket: https://www.amazon.de/dp/B00WPWBF50?tag=danieschei-21 *
Din-Plug: https://www.amazon.de/dp/B07CGFNSDX?tag=danieschei-21 *
Information about RotorHazard: https://github.com/RotorHazard/RotorHazard
Video about the project:
https://www.youtube.com/watch?v=ERcwVIFYOqw
License:
Creative Commons - Attribution
Cybi
