Foam Knight XE

The Foam Knight XE is a half dart, mag-in-grip compact blaster.
Visual design by Hotkoin.

Fires half darts at 100-120fps.

Learn more here: https://foamknight.com/

Download the assembly manual here: https://foamknight.com/xe-manual

Buy the hardware kit here: https://foamknight.com/shop

Customize your colors here: https://foamknight.com/color-customizer

Animated short: https://youtu.be/gavfXIxvNz8

Upgrade kits:
Tactical Upgrade Kit: https://www.thingiverse.com/thing:4960611

//////////////////////////////////////////////////////////////////////
Printing instructions:

No supports or brims are required for any part.
3 or more perimeter lines are recommended.
20% infill.

Print the dart_tail with 100% infill.
Print the piston with 5 or more perimeter layers using filament with good layer strength.

Colors:
File prefixes (primary, secondary, tertiary) indicate which tone the parts belong to.
https://foamknight.com/color-customizer
//////////////////////////////////////////////////////////////////////
Changelog:
[08/02/2021]
-black_backplate 1.0.0 -> 1.0.1 (Improved slide lock)
-orange_slide_lock 1.0.0 -> 1.0.1 (Improved slide lock)
-shell_dart_tail 1.0.0 -> 1.0.1 ((Improved slide lock)
[08/09/2021]
-orange_sear 1.0.0 -> 1.0.1 (Improved reliability)
-black_piston 1.0.0 -> 1.0.1 (Improved reliability)
-black_grip -> 1.0.0 -> 1.0.1 (Improved assembly)
-black_trigger_guard -> 1.0.0 -> 1.0.1 (Improved assembly)
[08/22/2021]
-orange_pushrod 1.0.0 -> 1.0.1 (Improved assembly)
-orange_mag_release 1.0.0 -> 1.0.1 (Improved printability)
-black_frontplate 1.0.0 -> 1.0.1 (Improved printability)
-orange_trigger 1.0.0 -> 1.0.1 (Improved printability)
-orange_sear_depressor 1.0.0 -> 1.0.1 (Improved printability)
[08/24/2021]
-shell_frame_middle 1.0.0 -> 1.0.1 (Improved printability)
-orange_trigger 1.0.1 -> 1.0.2 (Improved reliability)
-orange_mag_release_actuator 1.0.0 -> 1.0.1 (Improved printability)
-orange_mag_release 1.0.1 -> 1.0.2 (Improved printability)
-orange_pushrod 1.0.1 -> 1.0.2 (Improved assembly)
-orange_slide_lock 1.0.1 - 1.0.2 (Improved reliability)
[09/04/2021]
-tertiary_trigger 1.0.1 -> 1.0.2 (Improved tolerances)
-tertiary_sear_depressor 1.0.1 -> 1.0.2 (Improved reliability)
-secondary_front_plate 1.0.1 -> 1.0.2 (Improved printability)
//////////////////////////////////////////////////////////////////////

To keep up with Foam Knight projects, sign up at https://foamknight.com/newsletter.

Distributed under CC BY-NC-SA 4.0.

Enjoy!