August 5, 2021
Description
Easy print power module for SNR-CVT-1000SFP.
No need support.
Easy and fast install to SNR-CVT-1000SFP.
Required for assembly:
Jack 5.5x2.5 - 1 (for connect to "SNR")
Jack 5.5x2.1 - 1 (for connect POE adapter)
Socket 5.5x2.1 - 1 (for connect PSU)
DC-DC MP1584EN 22x17x4mm - 1 (for stepdown power to "SNR" 5V)
Build:
The jack is installed using a hot air gun. We warm up the hole and insert the jack outside the case.
Before installing a 5.5x2.5 jack, you need to cut the ground to the plus level and solder the wires.
5.5x2.1 Socket and jack are connected in parallel and to the MP1584EN input.
Output MP1584EN connected to jack 5.5x2.5.
License:
Creative Commons - Attribution
Ren_Dev
