Banana Pi clip case with drive bay

These cases are designed to be laser cut from 3mm or 1/8inch acrylic.
The tolerances are very close but the design has been successfully
realised, though even the protective plastic covering upsets the slot
sizes enough to cause issues.
The imperial file has the clearances for 1/8th inch the metric version
will not fit.
The original design files are kept in my https://github.com/kyllikki/designs/tree/master/bananapirepository.
I used 10mm long M3 nylon bolts to hold the board to the base with
nylon washers underneath the board as spacers.

• Layer 0 (black) is the through sheet profile cut.
• Layer 1 (red) is the connector and slot cutouts
• Layer 2 (yellow) is the text
  There are a couple of small issues with the design:
• The SD card slot is very fiddly to access
  This is a working design and has been made by me but I offer no
  guarantee that it will work for you.