Creality CR6 CR-6 SE Under-screen / Side Rail Raspberry Pi Model B 1 2 3 Case (35mm fan remix) - with STEP file

This is a very quick remix of the following:

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands by Malolo

https://www.thingiverse.com/thing:3719217

Creality CR6 CR-6 SE Under-screen / Side Rail Raspberry Pi Model B 1 2 3 Case" by SANGER_A2

https://www.thingiverse.com/thing:4722944

Top for 35mm Fan" by PBahner

https://www.thingiverse.com/thing:4883985

Thanks to the original designers for sharing their work!

This is pretty much the same as SANGER_A2's remix, designed to fit the CR6SE, I only added the 35mm fan cover by PBahner and lowered the whole thing a bit. I've tested this and it works fine with a Pi3 B+, but I did not have a fan to use with it before I returned the printer to my buddy. The fan should fit however since it is simply using a remix of a design that was tested for the fan parts.

There are 2 versions, one has in integrated hex pattern fan guard, and the other has just a hole for the fan (a fan guard is still a good idea, just print one separately and add it to the top). Use supports touching the build plate if making the version with the hex pattern fan guard.

I added a version of the base with a bit of a relief to give some more space if there is a heat spreader on the back of the board. But this version only provides 3.8mm clearance from the bottom of the board to the case, in the area under the LAN chip on the back of the Pi. This is named "CR6 SE RPI Fan Case11-bottom-for-heatsink.stl".

This was designed with ViaCAD V12 Pro. STEP file included.

UPDATE 1/21/2022 - The top model with the hexagonal pattern has been updated so it should not need supports. I have not tested this but it sliced OK. I will leave the original model as well, but if you wish to try the updated model, use the following for the top:

CR6 SE RPI Fan Case14-top-hex-pattern-no-supports.stl

If you find these models useful, please post a like or a comment with some pics of your prints.

I regularly update my current projects and other things I'm working on at my blog.
And if you like some of the stuff I design, you can follow me here or on Printables, to see what new stuff I post.

Thanks for looking!