Pikachu - Joint Size Correction

This Pikachu model is a remix work that originally shared also on Tingiverse. (Check out the original file here.)

I really like its round shape, especially the design of the movable spherical joints all over the body.

However, the original joint sizes were not very accurate, and I encountered many difficulties while printing and assembling.

Therefore, I decided to resize all the joints and twist some shapes for easier printing and assembling. I also resized (shortened) the Ear part to match Pikachu's proportions.

I recorded the remix process in my blog.
Welcome you all to visit and provide suggestions.
https://clipbot.wordpress.com/2021/08/12/pikachu-remix-part1/
https://clipbot.wordpress.com/2021/08/15/pikachu-remix-part2/

3D Model Remix: Meshmixer
Slicer: Kisslicer v1.6.3
3D Printer: Infinity X1 Speed (Near End)
Filament: PolyTerra PLA, Spider Maker Matt PLA

====================================================================

這隻Pikachu改造作品源自於Thingiverse的另一個作品。(原作品連結在此)

我很喜歡它圓滾滾的造型，特別是全身可動球狀關節的設計。然而，當我把原作者的模型列印出來後，發現球型關節尺寸未預留公差，造成多處關節零件無法組裝，必須耗費時間研磨後製。

於是我著手修正了所有球型關節尺寸，並修正部分模型造型，提高列印成功率，讓組裝更容易！我也修正了耳朵零件的長度，以符合皮卡丘原本的比例。

我將詳細的改造、製作流程紀錄在部落格，歡迎同好朋友指教。
https://clipbot.wordpress.com/2021/08/12/pikachu-remix-part1/
https://clipbot.wordpress.com/2021/08/15/pikachu-remix-part2/

3D模型修改軟體：Meshmixer
切片軟體：Kisslicer v1.6.3
3D列印機：Infinity X1 Speed (近端)
3D列印線：PolyTerra PLA, Spider Maker 消光PLA