Raspberry Pi 4 Quick Release Latching Mount (2020 T-slot version)

This has been updated on Printables, please go there to get the latest files:

https://www.printables.com/model/408487-raspberry-pi-4-quick-release-latching-mount-2020-t

This is a 2020 T-slot version of the base used with this thing (this will require the same parts aside from the mount, from the thing below):
https://www.thingiverse.com/thing:4936218

The T-slot itself was adapted from the model by Sanger_A2:

"Creality CR6 CR-6 SE Under-screen / Side Rail Raspberry Pi Model B 1 2 3 Case":
https://www.thingiverse.com/thing:4722944

I have not tested this (and don't plan to at this time), but it should be a tight fit on the t-slot rail. If you print one, it's at your own risk, but please provide feedback if you do make one, thanks!

Update 1/2/2022 - I added a back plate to this model which should be held on using four M3x10mm flat head screws.