iPad Stand with living hinge (laser cut)

Tried to internet search for a quick laser cut iPad stand and found nothing helpful but some pictures of unavailable designs.

This is very much my first try, so the following things need to be tweaked:

• the small slots/tabs along the spine don't quite match the plywood thickness I used, they should be thinner, but it is workable as is with baltic birch plywood
• left and right borders are a bit thin, so the base is not very rigid and the tablet doesn't easily sit in the mount along its bottom
• the highest angle of deflection is a bit underwelming, but serviceable, could be moved up

Printing:

On the Glowforge Pro, I used 160/Full on the non-proofgrade plywood.