NCASE M1 V6.1 Front Panel Reservoir

Replaces the original front panel of the NCASE M1 with a custom water reservoir. With this front panel reservoir, custom water loops inside the case should be made a lot easier. Also filling and draining is a lot easier with a reservoir in a SFF pc.
The reservoir is attached to the case with four screws that comes with the case. However, you must remove the plugs that holds the front panel of the case in order to mount the reservoir. Unfortunately, there is no going back to the original front panel as soon as the default plugs are removed.

I do not recommend 3d-printing the reservoir. Instead I suggest the use of a CNC machine. I used:

Acrylic 10mm sheets
M4x18 screws to secure the bottom and upper part of the reservoir together
2mm o-ring cord

I strongly suggest 3d pritning the "front_panel_hider.stl" to hide the empty space under the reservoir. See last image to get a better understanding. This hider however is not essential as it only beautifies the reservoir.