The Easy Shroud for Ender 3 and V2

DESIGN INTENT:

I Designed this Attachment after I became tired of fiddling with the bolts on other fan duct designs.

I wanted It to be:

Easily removable
Easy to Install
Use stock Parts where Possible
Fairly easy to print
Customizable
Good looking
Simple

As such, It is CLIP ON and Light and can be removed and mounted with a squeeze of the finger.

Feel free to design your own parts fan nozzle. I uploaded a STEP file of everything, so please go wild.

BASIC INFORMATION:

I have printed all of my prototypes in PLA and have rectified heat deformation. (Any deformation that did occur was minor enough not to worry about when printing PLA)

I have exported all the models in the intended printing orientation.

Included an M2 Blot spacer for the long M2 bolts

Fan Grid Does affect noise levels

I Have Made two OPTIONS for the EasyDuctHousing. So you can choose whether you want a fan grid or not

EasyGrid and fan spacer can be scaled in the slicer per your requirement

ENDER 3 INSTRUCTIONS:

Models Required:

EasyDuctHousing_E3 or EasyDuctHousing_E3 - NO FAN GRID
EasyPlinth_E3
EasyClip
EasyGrid
EasyNozzle
EasySpring
M2-BoltSpacer

You will need no Parts Besides the parts that come on the machine

Use the two short M2 Bolts that hold the Nozzle Fan to secure the Clip to the Housing duct

Use the other two M2 bolts in conjunction with two M2 Bolt spacers to secure the Nozzle fan

ENDER 3 V2 INSTRUCTIONS:

Models Required

EasyDuctHousing_E3_V2 or EasyDuctHousing_E3_V2 - NO FAN GRID
EasyPlinth_E3_V2
EasyClip
EasyGrid
EasyNozzle
EasySpring

You will need:

X1 M3 Nut - For mounting the Plinth
X2 M2 Bolts - Because the V2 only comes with two (or just push the nozzle fan in place and forget about it, that's what I did)

The rest is the same as the ender 3

Please Post a make of this if you do happen to make It. Id love to see them
Also, I would appreciate feedback, positive or negative.

Thank you