Cable chains connectors for Ender3 V2 (and "v1") - Direct drive version

Please consider donating if you find it useful (use the "tip designer" or buy me a coffe button)

---

Beh01der chain set is amazing, but sadly not compatible with direct drive system, where the extruder motor is missing from it's original location.

I inspired myself but recreated the parts from scratch.
No support needed on any of the 3 parts I designed (print orientation should be correct by default)

This is made to attach chain connectors to the empty plate (use m3 and bolts to secure)
Use chains, chain-link_cut, clips, plate and bottom connector from Beh01der's set (https://www.thingiverse.com/thing:4932649/files)
but use the following 3 from here instead.

• x_connector (also compatible with ender 3)
• xz_connector
• z_connector

I raised the x_connector chain attachement to avoid hitting a parts if using dual Z, but sagging still makes it hit. So I designed a simple ramp to have the chain slide on it (print at a small layer height for a smoother ramp ), use m3 and bolt to secure it.

I also included a clip that allows thicker cables

edit: fixed the x-connector, which was in the way of the top left hole (for bltouch, and some duct design)

---

Also Kudos to these creators:

https://www.thingiverse.com/thing:4723800
https://www.thingiverse.com/thing:3715002
https://www.thingiverse.com/thing:4316238