September 22, 2021
Description
########
4 jan 2022: Edited the frontgrip in meshmixer as original gave errors in slicing. Use fixed version. (filesize is a bit big now)
########
A simple, but very effective design in my opinion. Just print the two parts and add a pvc tube.
Its made for a single 5/8" 16 mm electical conduit/ pvc tube. (cut to 20cm).
Connect it all with m3 nuts and bolts or glue.
Use some antiscratch floor protectors on the grip and a rubber band to hold it in place.
Printed with PETG at low resolution (0.28) and at 45% infill.
Supports from buildplate only.
Its designed for Right Hand dominant people. If you are left hand dominant then mirror both files.
########
A gun stock adds immersion and helps with aiming. However in fast paced games, like population one etc... you need to be a bit more agile.
I just love the simplicity of the noobtube and it works great, however printed controller grips can be annoying. Also the bottom mounted tube sometimes gets in the way when reloading.
The sanlaki is definitely more immersive, but for quick action games... a bit overkill imo. The short sleek version is a bit overkill aswell imo.
So i remixed the files and designed this simple and effective short stock. I remade the front grip of the noobtube from scratch. Its much longer and has a different mounting style. I remixed the sanlaki grip with a different mounting style and the tube mount is angled downwards.
I wouldnt mind a little tip...for coffee...
########
Printed on stock Ender3.
Affiliate link: https://www.banggood.com/Creality-3D-Ender-3-3D-Printer-220x220x250mm-Printing-Size-With-Power-Resume-Function-or-V-Slot-with-POM-Wheel-or-1_75mm-0_4mm-Nozzle-p-1278399.html?p=GS29073405097201512C&custlinkid=1655833
(affiliate links dont cost you anything, but i get a little commission)
License:
Creative Commons - Attribution
Canino
