Wireless phone/watch charging stand

Didn't want to pay for a charging dock so I printed my own. Designed to fit a wireless charging circuit I found on aliexpress (link below) and the factory samsung wireless watch charger. I have the galaxy watch 4, not sure if the others are the same size.

https://www.aliexpress.com/item/1005002282456288.html?spm=a2g0o.detail.1000060.2.3a80112cnQ14EX&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.169870.0&scm_id=1007.13339.169870.0&scm-url=1007.13339.169870.0&pvid=805bb422-c95e-42df-a5ef-aaf3203c05d7&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.169870.0,pvid:805bb422-c95e-42df-a5ef-aaf3203c05d7,tpp_buckets:668%232846%238112%231997&&pdp_ext_f=%7B%22sceneId%22:%223339%22,%22sku_id%22:%2212000019995402935%22%7D

After printing I applied stain and let dry. I used a fine tip sharpie and brown markers to simulate the wood grain and then sealed it with lacquer. I forget the brand I used for this but it did not take stain well. The hatchbox brand works much better for stain.

After testing I made a band notch around the watch charger to allow the band to fall in a more natural position which is the stl in this file. Yours will look slightly different when printed but it is for the better.