Super Mini ITX PC Case

The super mini is a 12L 3d printed case that fits GPUs of up to 3 SLI slots and 300mm length and an SFX PSU. It also fits 2x 3.5" HDDs.

It is quite modular, so It could be made with shorter rods, if you need it smaller than 12L with sorter GPUs, no 3.5 HDDs or external PSU (NanoATX?), or even with longer ones (within reason) for extra HDD's or water-cooling, or longer GPU's (todo: Support for 4 SLI slot GPU's since asus and noctua nucked my "Fits all GPUs claim" :D)
Since I won't be having time for the next year, I won't be uploading files for the shorter or longer setups.

Reason: I had an open air case made from 2020 aluminum extrusions and printed parts, but I needed to move to an other country so I decided to make a case that will fit all my stuff while also takes as little space as possible.

With a footprint of 200x210x320mm should fit most standard printers (You don't need 320 Z height to print, the length comes from the rods and mesh not 3d printed parts)

BOM:

15mm Shoulder rig aluminium rods with m12 thread and end caps
PCIeX16 Riser 30cm
Delock Cable SATA Flexi (recommended not necessary)
Nzxt Internal USB Hub 3 - AC-IUSBH-M3 (If your mobo doesn't have enough USB's)
Angled C13 plug
C14 connector with switch (or not but would need a remixed AC block)
Generic USB 2.0 & HD AUDIO 2.5" front panel IO
ICY BOX USB 3.0 front panel - IB-HUB1417-i3
12mm push button to use for reset and activity LED (preferably match with rod colors)
19mm push button to use for power button and LED (preferably match with rod colors)

For the RGB Led's
Any compatible adressable or not LED strip (preferably 144Leds/meter)
Use any controller you want, there is space for an iCue lighting node (you can also made a clone with an arduino and open source github code)