Voron Afterburner with Bltouch for Ender 3, CR-10 - INSERTS REQUIRED

Why we can't upload as a 3mf is beyond me :-D

This is a remix of an Ender3 mounting plate for the Voron print head. There are several available here on thingiverse but I couldn't find any that had BL-Touch and ADXL345 mounts with threaded inserts. So I remixed one.

BL-Touch offsets
X = 37.10
Y = 9.25

When setting up your klipper to use the ADXL345 follow the documentation at https://www.klipper3d.org/Measuring_Resonances.html . Don't forget to change your axes_map in the [adxl345] section of your klipper config to map the Z direction of your ADXL345 to the X axes or your resonance results will be incorrect.

axes_map: z,y,x

My resonance values after testing will not be the same as yours but they should be similar.

[input_shaper]
shaper_freq_x: 121.4
shaper_type_x: mzv
shaper_freq_y: 50.4
shaper_type_y: ei

When printing you will need a stiff part so more perimeters are key. I printed with 4 perimeters and 45% infill and the part took the heated inserts very well and is plenty stiff.