October 21, 2021
Description
Hi there,
this is a lithophane lamp of the chosen one - the best cop in the world - the greatest Kung Fu master of all times - Kung Fury. There was no fan art of the greatest movie of all times, I just had to to do it. I'm releasing these files with David Sandbergs permission.
As far as I know the Sequel is planned for 2022 - I'm so freaking excited.
Disclaimer:
I don't give any warranties on the safety of the lamp, because this depends higly on the materials, print settings, bulb and lampholder you will use. Also always be careful with electricity, espacially if you are not sure what you are doing.
Print:
There are two version of the lamp, a full body version and a versio with kung furys face. Choose on and print the lithophane cyilnder. I printed it in 0.2 mm layerheight, but you will probably have a higher quality result with 0.1mm layers. The Base and The Top of the lamp fit both versions. I used PLA, but please be careful. Depending on the heat genereated by the lamp you choose it could not be the proper material to use.
The Lithophane was created with Itslitho (link below), see the pictres for the exact setting I used.
The Lamp I used is a warm white (2200 K) to have the reddish/ orange tone for the explosion (see link below). These bulbs have a moderate amount of heat radiation. I had the lamp turned on for 24h hours and you could still touch it without getting burned and it also did not bend or warp.
I will add the Fusion files for The Base and the Top of the lamp, so you can adjust it to your needs.
Links
Watch the movie here:
https://www.youtube.com/watch?v=bS5P_LAqiVg
Laserunicorns on Insta:
https://www.instagram.com/laserunicorns/
Lithophane generator
https://itslitho.com/
Filament used:
https://www.dasfilament.de/filament-refill/pla-1-75-mm/351/pla-filament-1-75-mm-tonweiss-matt-refill-800-g
License:
Creative Commons - Attribution - Non-Commercial
Maeshmaker
