Add more storage to your Ikea Mulig unit with this integrated four drawer unit!

Materials:

1. 6mm ply
2. PVA glue
3. Sealant, paint or oil

Equipment:

Laser cutter or CNC router
Clamps
Sand paper or orbital sander

Instructions:

1. Cut all the parts
2. Clean the soot from the edges - I find white vinegar and scrubbing brush or paper towel works well
3. Sand any particularly rough surfaces
4. Chamfer handle area and front edges of shelves for easier insertion
5. Glue all components together and clamp firmly in position, allowing at least 24hrs to set
6. Sand any protrusions, edges and stains from assembled parts
7. Apply selected surface treatment
8. Place on desired shelf level - You may need to loosen some of the shelving bolts in order to insert the unit, tightening them again after the unit has been positioned
9. Insert tabs to secure position
10. Insert drawers

Note:

You could even do this by hand - trace the template outlines onto stock material and cut using a jig saw (or even handsaw if you're brave). Create a straight edge guide by clamping a length of material to assist you.

Read about it on my blog.