Makita angle grinder dust collector

This is a dust collector for Makita 125 mm angle grinders. I designed it for the GA5030, but it should fit all Makita angle grinders with the same style of clamping.

To assemble you will need:

• 1pc screw M5x16 DIN912 with nut DIN934 for clamp
• 10pcs screw M3x30 DIN912 with nuts DIN934 for cover

There are two models of outlet for connection to a vacuum cleaner. The one is with an internal diameter 35mm for common vacuum cleaners, the second one is with thread for direct connection to a 40mm flexible hose (as you can see on the picture).

All parts are designed for printing without supports. Only the base needs supports under the clamp.