Slim card wallet

This is a remix of the "Minimalistic Card Wallet" by fhex (https://www.thingiverse.com/thing:4980000)

I used the general dimensions of the original and redesigned it to fit 8 and 4 cards (More added up to demand!) and be a little more comfortable to hold. I made is so the sides are flush with the top and bottom piece so you can't feel the connection point.

If anyone needs versions for less cards feel free to leave a comment and I'll get on it.

Bottom and Lid parts are printed outside laying down on glass, this is to get a smooth surface, of course glass is not necessary as it is up to your choice to choose how you print it.
Lever should be printed standing up(use normal supports only on bed) so it has the highest strength.

Put the lever through the cut out at the bottom of the case, little bit of flex on the case part is ok, just get the lever into it's hole. Next slide in the top piece from the bottom of the case, lever has to be rotated a bit to fit throught the cutout in the top piece.
In case the cards fall out by themselves, feel free to add some cloth to the top and bottom piece from the inside, just care for the where the lever moves. Microfiber cloth should be okay.
If print is too tight(cards don't fit) scale parts up a tiny amount.

• Fusion 360 file included!

UPDATES

15.11.2021. Added 4 card version.