SSD adapter for Atomos Ninja V - Making with 3D printing & modeling

If you want to install an SSD(Solid State Drive) in Ninja-V, you need a dedicated SSD or a custom caddy. In Ninja-V purchase package, only one caddy is bundled, so if you want to use multiple SSDs, you will need to purchase additional caddys. And the bundled caddy blocks the vents for heat dissipation with the plastic material and is completely in close contact with the main body, so I think that is one of the factors that make Ninja V hotter because it generates a lot of heat during recording operation.

In the modeling process, I wanted to make a simple SSD fixing adapter, and I made a type with a gap between the SSD and the body so that it could be a structure that helps heat dissipation. (Type_B) And it is designed so that it can be replaced immediately without adding a separate device to a general SSD. (Type_A)

Choose one of the two types you like and use it. (For Type B, Need 4 M3 x3mm screws to secure it to SSD)

File sharing is for sharing ideas. Use it for personal use only. Commercial use is not permitted.

Refer to the link below for more information and print file(STL). -Optimized for 3D printing
https://surplusperson.tistory.com/831

If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses.
https://paypal.me/suplusperson