November 3, 2021
Description
I created a custom case for a cheap kkmoon chinese spot welder on aliexpress.
the model is this one: https://www.aliexpress.com/item/1005002991443136.html?spm=a2g0s.9042311.0.0.220d4c4dgOAetM
Not perfect, but fit well. I use 4 m3x20mm screws and no need for nuts. If your printer print holes a little bigger than mine, you'll have the place to install them.
The top part need support, but not the bottom one.
The parts should be place flat on the slicer, not like the image.
License:
Creative Commons - Attribution
bouchagu
