MINI 3D-Printed RC CAR by El1as.F

Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts.

If you want to learn more about it, I also made a YouTube video:
https://www.youtube.com/watch?v=RjJTNpy3MkQ
(Yes the video is in German, but I made subtitles for English and French people)

I also made a Building Video:
https://www.youtube.com/watch?v=9Ftb_rpbNsk

Needed is:

• Brushless motor 2212 920kv outrunner
• Brushless motor controller 35 amps for RC cars
• Receiver
• Battery
• 9G Micro Servo Motor
• Ball bearing 10 × 15 × 4 mm
• 4x Spring suspension 15 × 10 (diameter) mm
  -Screws:
  • 7x M3 15 mm (To secure the main body parts)
  • 2x M3 10 mm (To secure the main body parts)
  • 5x M2 5 mm (for the direction and the motor gear)
  • 4x M3 20 mm (To secure the wheels)
• Some PLA and time to build it
• Rasp and sandpaper
• GREASE FOR THE GEARS AND CARDAN SHAFTS!!

Parts that I use:
https://bit.ly/3o1sv1n

If I forgot something, please let me know!