GBS Control Enclosure Custom with HDMI+Audio+SCART

Remix of Revo_Emag's excellent GBS Control enclosure:

-SCART Socket.
-Hole for Clock Gen On/Off switch to be installed (Preventing problems with PAL inputs)
-Tweaked lid to accommodate SCART connector.
-Tweaked HDMI bracket to accommodate more commonly found HDMI adapters from eBay.

Enclosure has built in printing supports on the parts that need it, so no need for any extra support in Cura!

Use M3 screws for everything except the small brace on the HDMI clamp, that part requires two M2.5 screws. Even though they are machine screws, they will tap a thread as you screw them in.

08/12/2021 Update - Uploaded a more refined version of the enclosure with thinner supports (to help with removal) and also some errors corrected. Ignore any messages in Cura about model errors, slices and prints fine.

14/12/2021 Update - Uploaded a more refined version of the HDMI clamp.

23/04/2025 Update - Uploaded a version without the built-in supports. Not sure why this wasn't an option before but better late than never!