November 15, 2021
Description
Since Geprc doesn't sell any spare prop guard for its cinelog25 I decided to design one to replace mines which were broken after a big crash.
I used my little knowledge of duct fan theory to try to make it more efficient than stock props guard.
After few tests I achieved a design that performs even better than stock one (see my videos on instagram).
You can print it in PLA in which case it will weight only a gram more than stock ones and still be strong enough to whistand small crashes. Note that it will be a bit less crash resistant than stock injection molded props guards but at least now you can print another and change it quite easily (you don't even have to remove the props).
For better results print it with the duct's ring flat and with 4 outlines perimeters.
Concentric infill is also much better.
If you can't print them I sell high quality carbon loaded nylon printed ones on my e-shop : badassdrones.fr >>> https://badassdrones.fr/products/cinelog25-carbon-ducts
may 2022 EDIT : Many of you asked me to make wider versions so I did!
As always the file is free but feedbacks, likes and types much appreciated!
Enjoy. Alex
If you like fpv and cinewhoops, make sure you check my other designs!
License:
Creative Commons - Attribution - Non-Commercial
Badassdrones
